![]() |
|
||||
|
|||||
Product Name:
Arduino Experimentation - Freeduino RichBoardProduct ID: EM-RB-Freeduino
Arduino Experimentation kit for SD Card Ethernet ENC28J60 I2C RTC EEPROM LDR Motor Driver LED Display Buzzer LCD IR and various other 21 experiments
User Manual - Quick View
Tutorials
Power of 21 Shields in One Single Product!!!All in One - Arduino Experimentation BoardThe Rich Board product series is developed by www.EmbeddedMarket.com for Single Microcontroller Support with extra rich features. The Rich Boards are now available for all microcontroller families. The unique handle for the Rich Board series distinguish it from other product range offered by www.EmbeddedMarket.com The Rich Boards are designed with variety of high end hardware interfaces. The Freeduino Rich Board is combination of Arduino Compatible Hardware + Lots of Interfacing circuits. Most of the famous Arduino Shield Circuits are included in this product as Interfacing Circuits. Thus no need to buy separate Shields, it's all on the same board!! The mechnical spacing for Shield compatibility is maintained using "Male" type headers. Power can be sourced via USB or 9VDC Adapter. Jumper is included for power source selection. No external power source is required if power is sourced from USB. The product comes Fully assembled & Tested. The Freeduino Rich Board has following interfaces on the board 1. Seven Segment Displays 2. Pulled Down Switches 3. 4x4 Matrix keypad 4. LCD 16x2 (16 Characters in 2 Lines) 5. LEDs 6. Variable resistance (also known as Presets) to be used as Analog Input 7. I2C based Real Time Clock using DS1307 8. I2C based EEPROM using 24C256 9. I2C based Digital to Analog (DAC) converter using MCP4725 10. The Arduino's Main Controller 11. Pulled up switches 12. ULN2803 based high current driver 13. DC Motor driver using L293D 14. IR Transmitter LED 15. IR Receiver Photo diode with comparator 16. IR receiver TSOP1738 for RC5 & other encoded IR reception 17. LM35 Temperature Sensor 18. Light Dependent Resistance (LDR) 19. SPI based EEPROM using 93C46 20. Micro SD Card with 3.3V & 5V selectable I/O Lines 21. Ethernet ENC28J60 for Internet enabled Arduino Application 22. Serial to TTL Converter using MAX232 23. Power regulator for 9V to 5V & 3.3V 24. Power Supply selection Jumper Single Pin Both ends with Female connectors are provided for connections between the Digital Pins & the Interface Pins. Product Packing: Product contents:
|
|||||||||||||||||||