Design your own microcontroller kit & board below.
Get your customized microcontroller board MANUFACTURED + ASSEMBLED + TESTED at UNBEATABLE cost!!!
FAQ: What will I get as end Product? :You will receive assembled and tested PCB as per your design selection made below. How much the time required for making it? : Delivery period approximate25 working days.
You may also select from the designs made by other users. These designs available under product section.
Select the parts below and click "Add to my design" button. Tip: Double click the Part name below to see Schematic & other details in PDF format. Opens in new window.
Microcontrollers
Interface
Power Supply
Misc.
Name your design:
Rate per board: Rs. 0.00
X Board Quantity:
Rs. 0.00
Courier Cost
Rs. 75
Processing cost
Rs. 0.00
----------------------------------------------
Total Order Amount
Rs. 0.00
Make my design Public
Keep my design Private (Processing cost will be added above.)
What is Public & Private Type Design? :Each new design goes through PCB design, Gerber making, film making
and small quantity PCB making process. This involves extra cost. If you decide to
make your design Public, you will not be charged the processing cost.
If you make the design Private, you will have to pay the processing
fees which is automatically calculated and in the range of Rs. 800 to Rs. 2000
depends on the complexity of design. Other users can see and buy the public designs.
Private designs are hidden and will not be available for sale to other users.
Can I add my Logo / Brand Name on the PCB? : Select design type as Private with minimum single order value of Rs 12,500
qualifies for Logo / Brand Name addition on the PCB. Email your logo / brand and the order number. Logo accepted in JPG / Text Format only. This will be printed in White color Ident.
IMPORTANT NOTE: : All Port pins, Input - Output pins, Interfacing Pins & Power related pins will be of "OPEN" type.
There will be no connection between the Port pins and The interfacing pins of the module. These pins will have Male Burg connector.
You have to use "Single pin Female to Female" connectors to connect between the port pins and the interfacing pins.
See this Image for example.
I / We Accept to following
I / We Accept that the PCB layout design, arrangement of components and selection of components for the end product to be made out of my / our above selection will be fully acceptable as delivered.
I / We Accept that I /We neither have control over nor have any preferences in the layout design, arrangement of components and selection of components.
I / We Accept that the end product does not carry any Cancel or refund or return or exchange or repair policy.
I / We Accept that end Product does not include any source code in any form e.g. Firmware, Hex, Raw program files etc
I / We Accept that the end product made out of my / our above selection is empty piece of hardware and which has no functionality assigned to it as there is no firmware loaded in it.
I / We Accept that the delivery schedule may change and the changed delivery schedule will be fully acceptable.
I / We Accept that PCB design related files, films and other software data is not included as deliverable and it's ownership will remain with "Embedded Market".
Your Address is required to Prepare Invoice. Orders with short address / invalid address will not be processed.
This is also must to those who plan to walk-in to our office for pickup.
Rs.
